We are best Manufacturers, Exporters & Stockists of Inconel 718 Bolts/Nuts in New Zealand. Nascent Pipe & Tubes offers an extensive range and is a known manufacturer of Inconel Alloy 718 Fasteners (Nuts / Bolts), which should be given uniform reductions to avoid the formation of duplex grain structures. For most applications, these Inconel 718 Hex Head Bolts is specified as: solution annealed and irecipitation hardened (precipitation hardening, age hardening, and precipitation heat treatment are synonymous terms).
Inconel 718 Hex Head Nuts is typically used for: Jet engine and Gas turbine operations. These Inconel 718 Square Bolts is non – magnetic, which is readily fabricated and may be welded in either the annealed or precipitation (age) hardened condition. Inconel 718 Square Bolts is age hardenable and often used in high temperature dynamic applications.
Inconel 718 Bolt/Nut Manufacturers, Inconel 718 Bolt/Nut Suppliers, Inconel 718 Bolt/Nut Stockists, Inconel 718 Bolt/Nut Exporters
Inconel 718 Bolt/Nut Manufacturers in New Zealand, Inconel 718 Bolt/Nut Suppliers in New Zealand, Inconel 718 Bolt/Nut Stockists in New Zealand, Inconel 718 Bolt/Nut Exporters in New Zealand
These Inconel 718 U-Bolts has excellent creep – rupture strength at temperatures to 1300 Degree F. This treatment gives the highest room temperature tensile and yield strengths in Inconel 718 Lock Nuts as well as producing the highest fatigue strength. These Inconel 718 Eye Bolts can be easily post – hardened by precipitation – hardening heat treatments.
Inconel 718 Eye Nuts is a high strength, corrosion resistant nickel chromium alloy, initially developed for the aerospace industry and still considered the material of choice for the majority of aircraft engine components. These Inconel 718 T-Bolts is a precipitation hardenable nickel – based alloy designed to display exceptionally high yield, tensile and creep – rupture properties at temperatures up to 704 Degree C.
Alloy 718 Bolt/Nut Specifications
| Specifications |
ASTM B 637 ASME SB 637 |
| Standard |
DIN, ASTM, BS and all International Standards |
| Length |
3 mm to 200 mm |
| Size |
M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Type |
Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts. |
718 Inconel Alloy Bolt/Nut Chemical Composition
| Grade |
C |
Mn |
Si |
Fe |
S |
Cr |
Al |
Ni |
| 718 |
min. |
– |
– |
– |
bal |
– |
17.0 |
0.2 |
50.0 |
| max. |
0.08 |
0.35 |
0.35 |
bal |
0.01 |
21.0 |
0.8 |
55.0 |
Inconel Alloy 718 Bolt/Nut Mechanical Properties
| Element |
Density |
Melting Point |
Tensile Strength |
Yield Strength (0.2%Offset) |
Elongation |
| 825 |
8.14 g/cm3 |
1400 °C (2550 °F) |
Psi – 80,000 , MPa – 550 |
Psi – 32,000 , MPa – 220 |
30 % |
Equivalent Grades for 718 Inconel Bolt/Nut
| Grade |
UNS No |
Old British |
Euronorm |
GOST |
Japanese JIS |
| BS |
En |
No |
AFNOR |
| Inconel 718 |
N07718 |
– |
– |
2.4668 |
– |
– |
– |
Our Export
Domestic Area
| Mumbai |
Ahmedabad |
Bhopal |
Bikaner |
Pune |
| Delhi |
Chennai |
Visakhapatnam |
Mangalore |
Nagpur |
| Bangalore |
Kolkata |
Siliguri |
Assam |
Indore |
| Hyderabad |
Surat |
Nashik |
Cochin |
Thane |
| Faridabad |
Rajkot |
Aurangabad |
Bhavnagar |
Ranchi |
| Coimbatore |
Mysore |
Salem |
Tirupur |
Bikaner |
| Raipur |
Bhubaneswar |
Bhilai |
Ankleshwar |
Bhiwandi |
| Vadodra |
Kochi |
People Also Search
Inconel 718 Bolt/Nut Manufacturers, Inconel 718 Bolt/Nut Suppliers, Inconel 718 Bolt/Nut Stockists, Inconel 718 Bolt/Nut Exporters, Inconel 718 Bolt/Nut Manufacturers in New Zealand, Inconel 718 Bolt/Nut Suppliers in New Zealand, Inconel 718 Bolt/Nut Stockists in New Zealand, Inconel 718 Bolt/Nut Exporters in New Zealand
