Nascent Pipe & Tubes offers an extensive collection of Incoloy Alloy 825 Fasteners (Nuts / Bolts), which is has a high level of corrosion resistance. Cold forming in our Incoloy 825 Hex Head Bolts may be done using standard tooling although lain carbon tool steels are not recommended as they tend to produce galling. These Incoloy 825 Hex Head Nuts resists general corrosion, crevice corrosion, pitting, inter – granular corrosion, and stress – corrosion cracking in both oxidizing and reducing environments. We are best Manufacturers, Exporters & Stockists of Incoloy 825 Bolt/Nut in Romania.
Brittle phases may form in our Incoloy 825 Square Bolts at temperatures above 540 Degree C, so it is not normally used at these temperatures, where creep – rupture properties would be design factors. These Incoloy 825 Square Nuts is a Alloy of nickel and chromium alloy that has excellent tensile strength and resistance to oxidation as well as carburization properties.
Incoloy 825 Bolt/Nut Manufacturers, Incoloy 825 Bolt/Nut Suppliers, Incoloy 825 Bolt/Nut Stockists, Incoloy 825 Bolt/Nut Exporters
Incoloy 825 Bolt/Nut Manufacturers in Romania, Incoloy 825 Bolt/Nut Suppliers in Romania, Incoloy 825 Bolt/Nut Stockists in Romania, Incoloy 825 Bolt/Nut Exporters in Romania
Our Incoloy 825 U-Bolts is resistant to chloride stress – corrosion cracking and pitting, where the molybdenum as well aids resistance to pitting and crevice corrosion. These Incoloy 825 Lock Nuts is often used in chemical process equipment, propeller shafts, spent nuclear fuel element recovery, tank trucks, and so on.
Our Incoloy 825 Eye Bolts is characterized by good resistance to oxidizing and non – oxidizing hot acids. These Incoloy 825 Eye Nuts is the forerunner of many of the Molybdenum containing nickel iron chromium alloys which have seen service over the past century.
Alloy 825 Bolt/Nut Specifications
| Specifications |
ASTM B 425 ASME SB 425 |
| Standard |
DIN, ASTM, BS and all International Standards |
| Length |
3 mm to 200 mm |
| Size |
M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Type |
Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts. |
825 Incoloy Alloy Bolt/nut Chemical Composition
| Grade |
C |
Mn |
Si |
Fe |
S |
Cr |
Cu |
Ti |
| 825 |
min. |
– |
– |
– |
22.0 |
– |
19.5 |
1.5 |
0.6 |
| max. |
0.05 |
1.0 |
0.5 |
– |
0.015 |
23.5 |
3.0 |
1.2 |
Incoloy Alloy 825 Bolt/nut Mechanical Properties
| Grade |
Tensile Strength (MPa) min |
Yield Strength 0.2% Proof (MPa) min |
Elongation (% in 50mm) min |
Hardness |
| Rockwell B (HR B) max |
Brinell (HB) max |
| 825 |
Psi – 80,000 , MPa – 550 |
Psi – 32,000 , MPa –220 |
30 |
– |
– |
Equivalent Grades for 825 Incoloy Bolt/nut
| Grade |
UNS No |
Old British |
Euronorm |
GOST |
Japanese JIS |
| BS |
En |
No |
AFNOR |
| Incoloy 825 |
N08825 |
NA 16 |
NiCr21Mo |
2.4858 |
NFE30C20DUM |
ЭП703 |
NCF 825 |
Our Export
Domestic Area
| Mumbai |
Ahmedabad |
Bhopal |
Bikaner |
Pune |
| Delhi |
Chennai |
Visakhapatnam |
Mangalore |
Nagpur |
| Bangalore |
Kolkata |
Siliguri |
Assam |
Indore |
| Hyderabad |
Surat |
Nashik |
Cochin |
Thane |
| Faridabad |
Rajkot |
Aurangabad |
Bhavnagar |
Ranchi |
| Coimbatore |
Mysore |
Salem |
Tirupur |
Bikaner |
| Raipur |
Bhubaneswar |
Bhilai |
Ankleshwar |
Bhiwandi |
| Vadodra |
Kochi |
People Also Search
Incoloy 825 Bolt/Nut Manufacturers, Incoloy 825 Bolt/Nut Suppliers, Incoloy 825 Bolt/Nut Stockists, Incoloy 825 Bolt/Nut Exporters, Incoloy 825 Bolt/Nut Manufacturers in Romania, Incoloy 825 Bolt/Nut Suppliers in Romania, Incoloy 825 Bolt/Nut Stockists in Romania, Incoloy 825 Bolt/Nut Exporters in Romania
