We are best Manufacturers, Exporters & Stockists of Titanium Gr 2 Bolt/Nut in Singapore. Nascent Pipe & Tubes is a known manufacturer of Grade 2 Titanium Bolts / Nuts, which is sometimes referred to as “Commercial Pure (CP)” due to its approximate yield strength. Designing with these Titanium Grade 2 Hex Head Bolts taking all factors into account has resulted in reliable, economic and more durable systems and components, which in many situations have substantially exceeded performance and service life expectations.
Our Titanium Grade 2 Hex Head Nuts possesses the greatest formability, excellent corrosion resistance and high impact toughness. Continuous service temperatures for these Titanium Grade 2 Square Bolts can reach up to 800 Degree F with occasional, intermittent service at 1000 Degree F.
Titanium Gr 2 Bolt/Nut Manufacturers, Titanium Gr 2 Bolt/Nut Suppliers, Titanium Gr 2 Bolt/Nut Stockists, Titanium Gr 2 Bolt/Nut Exporters
Titanium Gr 2 Bolt/Nut Manufacturers in Singapore, Titanium Gr 2 Bolt/Nut Suppliers in Singapore, Titanium Gr 2 Bolt/Nut Stockists in Singapore, Titanium Gr 2 Bolt/Nut Exporters in Singapore
Hold at 1103 Degree F to 1400 Degree F (595 Degree C to 760 Degree C) for two hours, then Air cool and Stress relive our Titanium Grade 2 Square Nuts by holding at 1004 Degree F to 1103 Degree F (540 Degree C to 595 Degree C) for 15 minutes to 30 minutes.
However, the high cost of these Titanium Grade 2 Eye Bolts and processing limit their use to military applications, aircraft, spacecraft, and medical devices. Our Titanium Grade 2 Eye Nuts is light weight and highly corrosion resistant, but has much lower strength than alpha – beta or beta titanium alloys. These Titanium Grade 2 T-Bolts should be emphasized that fabrication operations (annealing, descaling) can increase the impurity level unless particular care is taken.
Titanium Grade 2 Bolt/Nut Specifications
Specifications |
ASTM B 348 ASME SB 348 |
Standard |
DIN, ASTM, BS and all International Standards |
Length |
3 mm to Gr 2 mm |
Size |
M3 – M56 | 3/6″ to 2″ | Custom Sizes |
Type |
Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts. |
Gr 2 Titanium Alloy Bolt/Nut Chemical Composition
Titanium Gr 2 |
C |
Ti |
N |
Fe |
H |
O |
V |
Al |
0.1 max |
99.2 min |
0.03 max |
0.3 max |
0.015 max |
0.25 max |
- |
- |
Titanium Alloy Gr.2 Bolt/Nut Mechanical Properties
Density |
Melting Point |
Yield Strength (0.2%Offset) |
Tensile Strength |
Elongation |
4.5 g/cm3 |
1665 °C (3030 °F) |
Psi – 39900 , MPa – 275 |
Psi – 49900 , MPa – 344 |
20 % |
Equivalent Grades for Grade 2 Titanium Bolt/Nut
STANDARD |
UNS |
WERKSTOFF NR. |
Titanium Gr 2 |
R50400 |
3.7035 |
Our Export
Domestic Area
Mumbai |
Ahmedabad |
Bhopal |
Bikaner |
Pune |
Delhi |
Chennai |
Visakhapatnam |
Mangalore |
Nagpur |
Bangalore |
Kolkata |
Siliguri |
Assam |
Indore |
Hyderabad |
Surat |
Nashik |
Cochin |
Thane |
Faridabad |
Rajkot |
Aurangabad |
Bhavnagar |
Ranchi |
Coimbatore |
Mysore |
Salem |
Tirupur |
Bikaner |
Raipur |
Bhubaneswar |
Bhilai |
Ankleshwar |
Bhiwandi |
Vadodra |
Kochi |
People Also Search
Titanium Gr 2 Bolt/Nut Manufacturers, Titanium Gr 2 Bolt/Nut Suppliers, Titanium Gr 2 Bolt/Nut Stockists, Titanium Gr 2 Bolt/Nut Exporters, Titanium Gr 2 Bolt/Nut Manufacturers in Singapore, Titanium Gr 2 Bolt/Nut Suppliers in Singapore, Titanium Gr 2 Bolt/Nut Stockists in Singapore, Titanium Gr 2 Bolt/Nut Exporters in Singapore