We are best Manufacturers, Exporters & Stockists of Nickel Alloy 200 Bolt/Nut in Mexico. Nascent Pipe & Tubes is one of the prominent whole seller and supplier of quality Nickel Alloy 200 Fasteners (Bolts / Nuts), which is the higher carbon (0.04 – 0.10) version of the alloy. These Nickel 200 Hex Head Bolts has slightly improved corrosion resistance over stainless steel in strongly oxidizing environments.
Nickel 200 Hex Head Nuts is also advantageous for high temperature service because of its good mechanical properties. These Nickel 200 Square Bolts offers higher creep and stress rupture properties than Alloy 304 and, particularly might also be considered for exposures where sensitization and inter – granular corrosion are concerns. Nickel 200 Square Nuts is a columbium (niobium) / tantalum stabilized austenitic chromium-nickel stainless steel which was developed to provide an 18 – 8 type alloy with improved inter – granular-corrosion resistance.
Nickel Alloy 200 Bolt/Nut Manufacturers, Nickel Alloy 200 Bolt/Nut Suppliers, Nickel Alloy 200 Bolt/Nut Stockists, Nickel Alloy 200 Bolt/Nut Exporters
Nickel Alloy 200 Bolt/Nut Manufacturers in Mexico, Nickel Alloy 200 Bolt/Nut Suppliers in Mexico, Nickel Alloy 200 Bolt/Nut Stockists in Mexico, Nickel Alloy 200 Bolt/Nut Exporters in Mexico
These Nickel 200 Eye Bolts has a slightly improved corrosion resistance over other alloys of stainless steel in strongly oxidizing environments as a result of the addition of columbium (niobium) and tantalum. Nickel 200 Eye Nuts was developed for enhanced creep resistance and for higher strength at temperatures above 1000 Degree F (537 Degree C).
In most instances, the carbon content of these Nickel 200 T-Bolts enables dual certification. Nickel 200 T-Nuts does not perform well in chloride solutions, even in small concentrations, or in sulphuric acid. These Nickel 200 U-Bolts can be easily welded and processed by standard shop fabrication practices.
Nickel Alloy 200 Bolt/Nut Specifications
| Specifications |
ASTM B 160 ASME SB 160 |
| Standard |
DIN, ASTM, BS and all International Standards |
| Length |
3 mm to 200 mm |
| Size |
M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Type |
Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts. |
200 Nickel Alloy Bolt/Nut Chemical Composition
| Nickel 200 |
Ni |
C |
Mo |
Mn |
Si |
Fe |
P |
S |
Cu |
Cr |
| 99.0 min |
0.15 max |
– |
0.35 max |
0.1 max |
0.4 max |
- |
0.01 max |
0.25 max |
– |
Nickel Alloy 200 Bolt/Nut Mechanical Properties
| Density |
Melting Point |
Yield Strength (0.2%Offset) |
Tensile Strength |
Elongation |
| 8.9 g/cm3 |
1446 °C (2635 °F) |
Psi – 21500 , MPa – 148 |
Psi – 67000 , MPa – 462 |
45 % |
Equivalent Grades for 200 Nickel Bolt/Nut
| STANDARD |
UNS |
WERKSTOFF NR. |
AFNOR |
EN |
JIS |
BS |
GOST |
| Nickel 200 |
N02200 |
2.4066 |
N-100M |
Ni 99.2 |
NW 2200 |
NA 11 |
НП-2 |
Our Export
Domestic Area
| Mumbai |
Ahmedabad |
Bhopal |
Bikaner |
Pune |
| Delhi |
Chennai |
Visakhapatnam |
Mangalore |
Nagpur |
| Bangalore |
Kolkata |
Siliguri |
Assam |
Indore |
| Hyderabad |
Surat |
Nashik |
Cochin |
Thane |
| Faridabad |
Rajkot |
Aurangabad |
Bhavnagar |
Ranchi |
| Coimbatore |
Mysore |
Salem |
Tirupur |
Bikaner |
| Raipur |
Bhubaneswar |
Bhilai |
Ankleshwar |
Bhiwandi |
| Vadodra |
Kochi |
People Also Search
Nickel Alloy 200 Bolt/Nut Manufacturers, Nickel Alloy 200 Bolt/Nut Suppliers, Nickel Alloy 200 Bolt/Nut Stockists, Nickel Alloy 200 Bolt/Nut Exporters, Nickel Alloy 200 Bolt/Nut Manufacturers in Mexico, Nickel Alloy 200 Bolt/Nut Suppliers in Mexico, Nickel Alloy 200 Bolt/Nut Stockists in Mexico, Nickel Alloy 200 Bolt/Nut Exporters in Mexico
