Nascent Pipe & Tubes is one of the prominent trader and stockiest of Monel K500 Fasteners (Bolts / Nuts), which are also used in domestic, professional or industrial areas. The alloying elements in Monel K500 Hex Head Bolts tend to form either solid solutions or Alloys or carbides. Alloying elements in Monel K500 Hex Head Nuts also have an effect on the eutectoid temperature of the steel. We are best Manufacturers, Exporters & Stockists of Monel K500 Bolt/Nut In Romania.
Manganese and nickel in Monel K500 Square Bolts lower the eutectoid temperature and are known as austenite stabilizing elements. With enough of these elements, the austenitic structure of Monel K500 Square Nuts may be obtained at room temperature.
Monel K500 Bolt/Nut Manufacturers, Monel K500 Bolt/Nut Suppliers, Monel K500 Bolt/Nut Stockists, Monel K500 Bolt/Nut Exporters
Monel K500 Bolt/Nut Manufacturers in Romania, Monel K500 Bolt/Nut Suppliers in Romania, Monel K500 Bolt/Nut Stockists in Romania, Monel K500 Bolt/Nut Exporters in Romania
Carbide – forming elements in Monel K500 Eye Bolts raise the eutectoid temperature, where these elements are known as ferrite stabilizing elements. Deposition of complex and heavy organic Alloys of our Monel K500 Eye Nuts in crude and heavy oil can cause a number of severe problems up to pipeline blocking. Monel K500 T-Bolts are developed for energy – related applications involving oil & gas drilling and therefore are subjected to stresses in machine parts.
The specification of our Monel K500 T-Nuts covers nominal wall and minimum wall seamless ferritic alloy – steel pipe intended for high temperature service. Monel K500 U-Bolts are often specified when high strength is needed in moderate – to – large sections. Our Monel K500 Lock Nuts is heavily cold worked material, however, can have tensile strengths.
Alloy K500 Bolt/Nut Specifications
| Specifications |
ASTM B 865-04 ASME SB 865-04 |
| Standard |
DIN, ASTM, BS and all International Standards |
| Length |
3 mm to 200 mm |
| Size |
M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Type |
Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts. |
K500 Monel Alloy Bolt/Nut Chemical Composition
| Monel K500 |
Ni |
C |
Al |
Mn |
Si |
Fe |
Cu |
S |
Ti |
Cr |
| 63.0 min |
0.25 max |
2.3 – 3.15 |
1.5 max |
0.5 max |
05 – 2 |
27.0 – 33.0 |
0.010 max |
0.35 – 0.85 |
– |
Monel Alloy K500 Bolt/Nut Mechanical Properties
| Density |
Melting Point |
Yield Strength (0.2%Offset) |
Tensile Strength |
Elongation |
| 8.44 g/cm3 |
1350 °C (2460 °F) |
Psi – 1,15,000 , MPa – 790 |
Psi – 1,60,000 , MPa – 1100 |
20 % |
Equivalent Grades for K500 Monel Bolt/Nut
| STANDARD |
UNS |
WERKSTOFF NR. |
AFNOR |
EN |
JIS |
BS |
GOST |
| Monel K500 |
N05500 |
2.4375 |
- |
- |
- |
- |
- |
Our Export
Domestic Area
| Mumbai |
Ahmedabad |
Bhopal |
Bikaner |
Pune |
| Delhi |
Chennai |
Visakhapatnam |
Mangalore |
Nagpur |
| Bangalore |
Kolkata |
Siliguri |
Assam |
Indore |
| Hyderabad |
Surat |
Nashik |
Cochin |
Thane |
| Faridabad |
Rajkot |
Aurangabad |
Bhavnagar |
Ranchi |
| Coimbatore |
Mysore |
Salem |
Tirupur |
Bikaner |
| Raipur |
Bhubaneswar |
Bhilai |
Ankleshwar |
Bhiwandi |
| Vadodra |
Kochi |
People Also Search
Monel K500 Bolt/Nut Manufacturers, Monel K500 Bolt/Nut Suppliers, Monel K500 Bolt/Nut Stockists, Monel K500 Bolt/Nut Exporters, Monel K500 Bolt/Nut Manufacturers in Romania, Monel K500 Bolt/Nut Suppliers in Romania, Monel K500 Bolt/Nut Stockists in Romania, Monel K500 Bolt/Nut Exporters in Romania
