We are best Manufacturers, Exporters & Stockists of Aluminium Bolts/Nuts in Hungary. Nascent Pipe & Tubes offers a widespread array of Aluminium Steel Bolts / Nuts, which is available in different designs, shapes and sizes for our customers at best rates. For maximum corrosion resistance to chemical environments, it is essential that the surface of Aluminium 6061 Hex Head Bolts be free of all heat tint or oxide formed during annealing or hot working. Aluminium 6082 Hex Head Nuts is cold worked using standard tooling, where no obvious difference in corrosion of these alloys above and below the melt line.
Tests exposed in boiling acid of Aluminium 5083 Square Bolts, exhibit general corrosion rates in 20 % acid and greater than at higher concentrations. The coolest property of Aluminium 5086 Square Nuts is that it does not allow the formation of precipitates of grain-boundaries on the weld heat affected zone.
Aluminium Bolt/Nut Manufacturers, Aluminium Bolt/Nut Suppliers, Aluminium Bolt/Nut Stockists, Aluminium Bolt/Nut Exporters
Aluminium Bolt/Nut Manufacturers in Hungary, Aluminium Bolt/Nut Suppliers in Hungary, Aluminium Bolt/Nut Stockists in Hungary, Aluminium Bolt/Nut Exporters in Hungary
Because copper and nickel mix readily in the molten state, the useful range of Aluminium 5052 Eye Bolts is not confined within any definite limits. Aluminium 6063 Eye Nuts has good resistance to oxidation and may be used in continuous service up to 1140 Degree C provided reducing sulphur gases are not present.
Aluminium 7075 T-Bolts is approved for service up to 1230 Degree F, where its melting point is 2615 Degree F – 2635 Degree F. In boiling 45 % magnesium chloride, stressed U-bend specimens of these Aluminium 1100 T-Nuts did not crack in 30 days of exposure.
Aluminium 6061, 6082, 5083, 5086, 5052 ,6063, 7075, 1100 Bolt/Nut Specifications
| Specifications |
ASTM B 211 ASME SB 211 |
| Standard |
DIN, ASTM, BS and all International Standards |
| Length |
3 mm to 200 mm |
| Size |
M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Type |
Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts. |
Aluminium Bolt/Nut Chemical Composition
| Grade |
Si |
Fe |
Cu |
Zn |
Mn |
Mg |
Ti |
Cr |
Al |
Others(Total) |
| Aluminium |
0.40 – 0.80 |
0.70 max |
0.15-0.40 |
0.25 max |
0.15 |
0.8-1.2 |
0.15 max |
0.04-0.35 |
Balance |
0.15 max |
Mechanical Properties for Aluminium Bolt/Nut
| Temper |
Tensile |
Hardness |
|
Ultimate |
Yield |
Elongation |
Brinell |
|
KSI |
MPA |
KSI |
MPA |
% |
|
| T6, T651 |
45 |
310 |
21 |
145 |
25 |
65 |
Physical Property for 6082 Aluminium Bolt/Nut
| Physical Property |
Value |
| Density |
2,70 g/cm³ |
| Melting Point |
582 °C |
| Thermal Expansion |
23.4 x 10^-6 /K |
| Modulus of Elasticity |
69 GPa |
| Thermal Conductivity |
170 W/m.K |
| Electrical Resistivity |
%43 IACS |
Our Export
Domestic Area
| Mumbai |
Ahmedabad |
Bhopal |
Bikaner |
Pune |
| Delhi |
Chennai |
Visakhapatnam |
Mangalore |
Nagpur |
| Bangalore |
Kolkata |
Siliguri |
Assam |
Indore |
| Hyderabad |
Surat |
Nashik |
Cochin |
Thane |
| Faridabad |
Rajkot |
Aurangabad |
Bhavnagar |
Ranchi |
| Coimbatore |
Mysore |
Salem |
Tirupur |
Bikaner |
| Raipur |
Bhubaneswar |
Bhilai |
Ankleshwar |
Bhiwandi |
| Vadodra |
Kochi |
People Also Search
Aluminium Bolt/Nut Manufacturers, Aluminium Bolt/Nut Suppliers, Aluminium Bolt/Nut Stockists, Aluminium Bolt/Nut Exporters, Aluminium Bolt/Nut Manufacturers in Hungary, Aluminium Bolt/Nut Suppliers in Hungary, Aluminium Bolt/Nut Stockists in Hungary, Aluminium Bolt/Nut Exporters in Hungary
