We are best Manufacturers, Exporters & Stockist of Orifice Flanges in Peru. We are worked in get-together five star need nature of Hole Flanges The principal clarification behind a hidden Flanges is to offer interest to a line for metering of fluids or gasses. A hidden plate is squashed between several Flanges when it is being showed up in a line and the whole collecting is shown as a hole Flanges mixing. Jack-fixes the party make a short summit of the hidden plate. In the meantime, the hole plate, which is the metering contraption, joins a powerless plate by structures for a square edge, concentric, and round opening in inside point. Two weight tap-openings are other than penetrated in each Flanges for to gage weight limit totally through the hole.

Opening Flanges are utilized as a decision of the standard line Flanges when stream spout or hole plate is utilized. The hole plate is a general scattered thing and isn't being sold as a touch of the Flanges gathering. These Flanges are for the most part utilized as a scramble of various applications industry. They are sensible in various sizes, focal centers, examinations and thickness as appeared by the client's necessities, and are proposed to driving costs in march.

Hole Flanges are utilized with Opening meters to check the stream advancement of either fluids or gases in the particular pipeline. Sets of weight "Tappings", everything thought about on 2 sides, unequivocally change one another, are machined into the hidden Flanges. This makes separate opening carriers or tappings in the line divider senseless.

Orifice Flanges Manufacturers, Orifice Flanges Suppliers, Orifice Flanges Stockists, Orifice Flanges Exporters

Orifice Flanges Manufacturers in Peru, Orifice Flanges Suppliers in Peru, Orifice Flanges Stockists in Peru, Orifice Flanges Exporters in Peru

Opening Flanges everything considered go with either Raised Appearances or RTJ (Ring Type Joint) facings. They are, for every single concentrated clarification, the transition to as weld neck and slip on Flanges with extra machining.

The picture on the right shows a set Opening Flanges, where a Hole Plate is mounted and a jack screw is machined. This jack screw is utilized to attract disengaging the Flanges for evaluation or replacement of the Opening Plate and gaskets.

The degree of Hole Flanges covers every standard size and ranges, and all conventional Flanges materials. Flanges are open in Welding Neck, Slip On, and Strung edge, and are regularly given two 1/2" NPT tappings in every Flanges.

ASME B16.36 covers Aspects and layered attFlangesutes from Hole Flanges (like those shrouded in ASME B16.5) that have opening weight differential affiliations.

Orifice Flanges Specifications:

Standards: ANSI B16.47 Series A & B, ANSI B16.5, API-605, MSS SP44, ASA, EN1092, BS 4504, DIN
Type: Orifice Flanges
Size:  ½” (15 NB) to 48″ (1200NB)
 Class : 150 Class, 300 Class, 400 Class, 600 Class, 900 Class, 1500 Class, 2500 Class, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Material: Stainless Steel, Duplex, Super Duplex, Nickel Alloys, Alloy Steel, Carbon Steel, Low temperature Steel
Material Grade:
Stainless Steel Orifice Flanges:  ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L
Duplex & Super DuplexSteel Orifice Flanges: ASTM A182 / ASME SA182, F 44, F 45, F51, F 53, F 55, F 60, F 61
Carbon Steel Orifice Flanges: ASTM A105 / ASME SA105, ASTM A350 / ASME SA350, ASTM A181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F70
Low Temperature Carbon Steel Orifice Flanges (LTCS): Flange, A350 LF2/A350 LF3
Alloy Steel Orifice Flanges:  ASTM A182 / ASME SA182 & A387 F1, F5, F9, F11, F12, F22, F91
Nickel Alloy Orifice Flanges:  ASTM / ASME SB 564 / 160 / 472, UNS 2200 ( Nickel 200 ), UNS 2201 (Nickel 201 ), UNS 4400 (Monel 400 ), UNS 8020 ( Alloy 20 / 20 CB 3, UNS 8825 Inconel (825), UNS 6600 (Inconel 600 ), UNS 6601 ( Inconel 601 ), UNS 6625 (Inconel 625), UNS 10276 ( Hastelloy C 276 )

We offer the following types :

Slip on threaded ring joint corner tap weld neck orifice flanges
Raised Face slip-on orifice flange manufacturers
Ring-Type joint weld neck orifice flanges
Corner tap orifice flanges
Raised Face weld neck orifice flanges

MATERIALS USED TO PRODUCE ORIFICE FLANGES :

Brass
Nickel
Cast iron
Carbon Steel
Stainless Steel
Bronze
Aluminum
Alloy
Copper etc

MATERIAL GRADE of Orifice Flanges

Stainless Steel Orifice Flanges –  ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L

Duplex Steel Orifice Flanges –  ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61

Carbon Steel Orifice Flanges –   ASTM / ASME A/SA 105 ASTM / ASME A 350 , ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F706

Low Temperature Carbon Steel Orifice Flanges –  ASTM A350, LF2, LF3

Copper Alloy Orifice Flanges –  ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200

Alloy Steel Orifice Flanges –  ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91

Nickel Alloy Orifice Flanges –  ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020)

Our Export

Domestic Area